Products Fully Automatic Clay Brick Making Machine for Landscape and Paving Engineering Series
Product details of the fully automatic clay brick making machine
Product Information
Zhengzhou Yingfeng Machinery Co., Ltd. insists on using first-class raw material. The performance of this product is more stable than that of other products on the market. The loyalty of our staff keeps this product strong business competition.
Advantages:
-
Strong applicability,high efficiency;
2.High productivity;
3.Labor saving;
4.Suitable for various materials.
The way to deal with the air leak of vacuum chamber.
The adjustment of the vacuum pump is according to the specification of it. When the brick machine works normally and the pug material is extruded smoothly, you can start up the vacuum pump. You can light candles or something easy to produce smoke to test the leak. You can begin the test from the entrance of the first level extruded mud cylinder. If there is leaking, the flame or smoke will be inhaled into the vacuum chamber. The way to deal with the breakdown is to open the mud cylinder and cut short the spiral leaf to extend the closed area. The length of the closed area is not proper too long. Only to make sure there is no air leak is ok. Too long will increase resistance and energy consumption. With the attrition of the spiral leaf, the closed section will be extended gradually. After solve the clay material closed problem, you can check every commissure part of the vacuum chambers and every part that may leak air. If there is leaking, you should open the vacuum chamber to solve the problem if it is serious, on the contrary, you only need use acetone to clean the surface and use polymer sealant to seal. Because of the negative pressure of the vacuum chamber, the air is inhaled, it’s easy to seal. The polymer sealant should be waterproof, fight oil its toughness is good when it is dry. The brittle one is not proper to choose. Because it is the negative pressure, the pressure of spring is not need too big. And at the beginning it will leak little, but after running-in this situation will be changed.
Technical Parameters
| Model | Capacity Up to (t/h) |
Auger diameter (mm) |
Extruding pressure (MPA) |
Production Line Power (KW) |
Molding moisture content |
| JKY45 | 32.5 | 450 | 4 | 45/110 | 14-16% |
| JKY50 | 40 | 500 | 4 | 75/160 | 14-16% |
| JKY55 | 45 | 550 | 4 | 75/200 | 14-16% |
| JKY60 | 50 | 600 | 4 | 110/280 | 14-16% |
| JKY75 | 70 | 700 | 4 | 160/355 | 14-16% |
Brick Sample
Company Feature
• Our company has a high-standard, high-demand, high-efficiency, high-capacity team composed of experienced professionals, which provides a powerful force for to manufacture better products.
• Our company insists on the service concept of 'integrity is the foundation, customer is the supreme', and strives to provide all-round quality service for customers.
• Yingfeng Machinery's products are sold to both domestic and foreign markets
• Yingfeng Machinery's location enjoys traffic convenience and has complete infrastructures around. All these provide good conditions for our company's rapid development.
The products we produced are excellent in quality and cost-effective. If in need, please contact us!