Product details of the brick making machine price list
Product Information
The novel design put forward by Zhengzhou Yingfeng Machinery Co., Ltd. realizes more scientific and efficient management of brick making machine price list. The product has long-term service, stable performance, and great durability, etc. The product is known in the industry for its distinguished features.
Our extruder belongs to Semi-stiff and is special designed for the soft clay, it's more suitable for the country like Bangladesh and India where use pure clay in high moisture content. Our extruder is high-performance vacuum extrusion equipment for forming of various type solid bricks and hollow blocks made from clay or clay mixture with coal gangue, shale, coal dust and other solid wastes. It is designed to be produced with German KWS technology according to German standards and is authorized to use German trademark of GFK. Its mixing reducer and extrusion reducer is equipped with hardenedgears which are all grinded.
.How to operate clay brick extruder correctly?
①Release the clutch before turning on the switch. Start the motor, then slip the clutch in when motor reaches normal speed. Feeding speed is supposed to get the vacuum chamber running smoothly, not blocked. And it is strictly prohibited to start with load.
②For clay brick extruder in normal production, start vacuum pump firstly, and then start clay brick extruder when the reading of the vacuum gauge reaches required level.
③Release the clutch, then turn off the motor before stopping the machine. For stopping vacuum brick extruder, close upper stage --mixer part firstly, then lower stage--extrusion part. If the machine needs to be temporarily stopped, it is only necessary to release the clutch device, no need to turn off the motor. Stop adding and squeeze out the mud before stopping extruder. Turn off the vacuum pump when vacuum extruder stops.
④Warm reminder：during operation, you must concentrate on the operation of the machine mouth, pay attention to the mud quality, and take appropriate measures in time.
⑤For vacuum extruder, pay attention to mud condition in vacuum chamber. If there is mud accumulation, you can adjust it by suspending the upper mixer to prevent blockage. Be careful with the degree of vacuum gauge and find out the causes in time if the vacuum does not meet the requirements.
More specific information about operation,repair and maintenance ,pls check DOWNLOAD Section (Profile No.24).
http://www.yfbrickmachine.com/faq
Technical Parameters:
| Model | Capacity Up to (t/h) |
Extruder Power (KW) |
Vacuum degree (MPA) |
Vacuum pressure (MPA) |
Out size (mm) |
| VP50 | 32.5 | 132+55 | ≤-0.092 | 4 | 7400x2600x2600 |
| VP60 | 45 | 200+90 | ≤-0.092 | 4 | 8800x2900x2900 |
| VP75 | 55 | 250+110 | ≤-0.092 | 4 | 9400x3100x3300 |
| VP90 | 80 | 315+132 | ≤-0.092 | 4 | 9600x3200x3500 |
| VP120 | 125 | 450+200+18x2 | ≤-0.092 | 4 | 10200x3100x4025 |
Brick Sample
Company Advantage
• Our company thinks highly of service. We innovate service methods and improve service quality, so as to provide thoughtful services for each customer, including pre-sales consulting, after-sales service management.
• Yingfeng Machinery's location enjoys traffic convenience and has complete infrastructures around. All these provide good conditions for our company's rapid development.
• Our company has a professional R&D team and a high-quality production team, and they are the strong backing for our development. Our team members are experienced and innovative, for they are engaged in production for many years.
We only produce high-quality products. Welcome customers to contact customer service staff for consultation!