Clay Brick Making Machine Semi Automatic Clay Brick Making Machine for Landscape and Paving Engineering Manufacturing
Product details of the semi automatic clay brick making machine
Product Description
The distinctive design of Yingfeng Machinery semi automatic clay brick making machine comes from our professional design team. To guarantee quality of this product, our quality check team strictly implements measures of testing. R&D and marketing ability are two fundamental kinds of 'core competence' for Zhengzhou Yingfeng Machinery Co., Ltd..
Our extruder belongs to Semi-stiff and is special designed for the soft clay, it's more suitable for the country like Bangladesh and India where use pure clay in high moisture content. Our extruder is high-performance vacuum extrusion equipment for forming of various type solid bricks and hollow blocks made from clay or clay mixture with coal gangue, shale, coal dust and other solid wastes. It is designed to be produced with German KWS technology according to German standards and is authorized to use German trademark of GFK. Its mixing reducer and extrusion reducer is equipped with hardenedgears which are all grinded.
.How to operate clay brick extruder correctly?
①Release the clutch before turning on the switch. Start the motor, then slip the clutch in when motor reaches normal speed. Feeding speed is supposed to get the vacuum chamber running smoothly, not blocked. And it is strictly prohibited to start with load.
②For clay brick extruder in normal production, start vacuum pump firstly, and then start clay brick extruder when the reading of the vacuum gauge reaches required level.
③Release the clutch, then turn off the motor before stopping the machine. For stopping vacuum brick extruder, close upper stage --mixer part firstly, then lower stage--extrusion part. If the machine needs to be temporarily stopped, it is only necessary to release the clutch device, no need to turn off the motor. Stop adding and squeeze out the mud before stopping extruder. Turn off the vacuum pump when vacuum extruder stops.
④Warm reminder：during operation, you must concentrate on the operation of the machine mouth, pay attention to the mud quality, and take appropriate measures in time.
⑤For vacuum extruder, pay attention to mud condition in vacuum chamber. If there is mud accumulation, you can adjust it by suspending the upper mixer to prevent blockage. Be careful with the degree of vacuum gauge and find out the causes in time if the vacuum does not meet the requirements.
More specific information about operation,repair and maintenance ,pls check DOWNLOAD Section (Profile No.24).
http://www.yfbrickmachine.com/faq
Technical Parameters:
| Model | Capacity Up to (t/h) |
Extruder Power (KW) |
Vacuum degree (MPA) |
Vacuum pressure (MPA) |
Out size (mm) |
| VP50 | 32.5 | 132+55 | ≤-0.092 | 4 | 7400x2600x2600 |
| VP60 | 45 | 200+90 | ≤-0.092 | 4 | 8800x2900x2900 |
| VP75 | 55 | 250+110 | ≤-0.092 | 4 | 9400x3100x3300 |
| VP90 | 80 | 315+132 | ≤-0.092 | 4 | 9600x3200x3500 |
| VP120 | 125 | 450+200+18x2 | ≤-0.092 | 4 | 10200x3100x4025 |
Brick Sample
Company Advantage
• Yingfeng Machinery is located in a unique geographical position with pleasant climate and rich resources. Meanwhile, the traffic convenience is conducive to the circulation and transportation of products.
• We promise choosing Yingfeng Machinery is equal to choosing quality and efficient services.
• On the basis of modern management mode, our company has established a talent team of high technical level and comprehensive strength.
• The main brand of our company has become a favorite in the market, which is not only widely praised in the domestic market, but also has been favored by consumers in the international market.
For bulk purchase of the products, please contact us.