QT 5-15 Concrete block paver making machine

Product Introduction:
(1)Controlled by PLC system;
(2)Material stock hopper and the material feeding hopper separated,quantitative feed of materials achieved, which effectively avoid the liquefaction of concrete and reduce the feeding time;
(3)Feeding system adopt the muti-stirring fork, the mold case can slosh before and after quickly, in order to put the materials full the bottom of the mold case fast;
(4)Effectively guarantee the reliability and stability of machine long-term work,reducing the maintenance failure rate;
(5)Wide applicability.This machine can produce different kinds of standard block,standard brick, planting brick, revetment ties, pavement slabs, decorative brick and so on

SEND INQUIRY NOW
CONTACT US

Phone:

0086 18638712391

Telephone:

0086 18638712391

WhatsApp:

0086 18638712391

WeChat:

0086 18638712391
Send your inquiry


QT5-15 AUTOMATIC BLOCK MAKING MACHINE


The block machine is used for the production of all types and sizes of concrete blocks such as wall blocks such as wall blocks, paving stones, road blocks, interlock, you just need to change the mould to have all this products.

 Model QT5 block machine can produce 7200pcs 40*20*20cm blocks or 500 square meters paving blocks per 8 hours

QT5-15 brick making machine characteristic 

The production capacity depends on this forming machine and it is also the essential part of the whole production line. You can change

moulds on this parts to make different shaps of blocks, bricks, colored-paving stones and curbs.

• The process is controlled by PLC and fitted with remote control device.for PLC control system ,we usually use Japan Mitsubishi or

  Taiwan Brand  .

• The electricity motor for host machine we use Germany Siemens motor ,for other parts ,we use CE motor .

• about the switches ,we will use France Schneider or China CHNT

• Rakes in several rows make sure raw materials fed well-distributed.

• Hydraulic components we use Taiwan JiuGang famous brands.

• The demoulding synchronizer avoids the damage to concrete products.

• The vibration system contain two part ,one is up-moild vibbration box ,it is electricity motor to supply the power for up-mould

   vibration box. And the down moulld ,there have one big vobration .when the scatter material work finish ,the hydraulic power with the two

   vibration power will assure the good quality for product

• The mould is processed with carburizing,nitriding, wolfram carbide and quenching which ensures its strength reach to 54~58 HRC

   and can be used 100 thousand times.


IF YOU HAVE MORE QUESTIONS,WRITE TO US
Just tell us your requirements, we can do more than you can imagine.
Name
E-mail
Content

Send your inquiry