Brick Molding Machine/Hydraulic Brick Machine/Interlock Brick Making Machine

Brick Molding Machine/Hydraulic Brick Machine/Interlock Brick Making Machine

why clay brick break, why clay brick crack ,why does brick crack?

Most of brick factory owners spent a lot of time and fianace to start their brick factories, however,not all of them get success, the reasons is that before starting clay brick factory, they did not conduct enough study and servey. To avoid investment loss for clay brick production, we have made the following summary for the common phenomenon of poor quality bricks and common mistakes the new clay brick facotry owners always make.

Brick Molding Machine/Hydraulic Brick Machine/Interlock Brick Making Machine

Soft plastic vacuum extruder is suitable for the raw materials with moisture content higher than 19%;the allowed extrusion pressure is 0.4~1.8 MPa.

Semi hard vacuum extruder is suitable for the raw materials with moisture content between 16%~19%;the allowed extrusion pressure is 1.8~2.5 MPa.

Hard plastic vacuum extruder is suitable for the raw materials with moisture content lower than 16%;the allowed extrusion pressure is 2.5~4.5 MPa.

Brick Molding Machine/Hydraulic Brick Machine/Interlock Brick Making Machine

Less than 8% of dry brick can be sintered, if the water moisture is too large, the brick will be easy to crack at the sintering time.

Welcome To Our Company Hope We Can Have A Good Cooperation.