Low Cost Qt6-15d Automatic Interlock Cement Fly Ash Brick Machines Concrete Hollow Paver Block Making Machine In Ghana

Low Cost Qt6-15d Automatic Interlock Cement Fly Ash Brick Machines Concrete Hollow Paver Block Making Machine In Ghana

For example, assuming that the type and total amount of clay minerals contained in a kind of clay are exactly the same as that in a certain type of shale, plasticity index measured by the geotechnical test method is much higher than shale,because  dispersed clay mineral particles in the clay are uniform and small.If the shale is fully crushed, so that the clay minerals in the shale reach a finely dispersed state like the clay mineral particles contained in the clay, it is possible that the plasticity index measured by the geotechnical test method will be the same as that of the clay.However, it can’t be achieved in actual production,causing a great plasticity fluctuation during processing raw materials such as coal gangue and shale.Which method should be used to describe and compare the plasticity of these raw materials?

Low Cost Qt6-15d Automatic Interlock Cement Fly Ash Brick Machines Concrete Hollow Paver Block Making Machine In Ghana

The raw material for making bricks can be ,clay, fly ash,soil.

JZC300 extruder is for non-vacuum soild clay bricks, however, if you want to make hollow or multi-hole bricks,We can also change the non-vacuum into vacuum ,so as to produce hollow or multi-hole bricks.

Low Cost Qt6-15d Automatic Interlock Cement Fly Ash Brick Machines Concrete Hollow Paver Block Making Machine In Ghana

Advantages:

1.High capacity,compact structure,ease maintenance;

2.Strong applicability,energy saving;

3.Only use one motor;

4.The raw material for making bricks can be clay,coal gangue.

Welcome To Our Company Hope We Can Have A Good Cooperation.