Concrete Lintel Precast Blocksmall Production Machinery Interlocking Malaysia High Pressure Brick Machine

Concrete Lintel Precast Blocksmall Production Machinery Interlocking Malaysia High Pressure Brick Machine

For example, assuming that the type and total amount of clay minerals contained in a kind of clay are exactly the same as that in a certain type of shale, plasticity index measured by the geotechnical test method is much higher than shale,because  dispersed clay mineral particles in the clay are uniform and small.If the shale is fully crushed, so that the clay minerals in the shale reach a finely dispersed state like the clay mineral particles contained in the clay, it is possible that the plasticity index measured by the geotechnical test method will be the same as that of the clay.However, it can’t be achieved in actual production,causing a great plasticity fluctuation during processing raw materials such as coal gangue and shale.Which method should be used to describe and compare the plasticity of these raw materials?

Concrete Lintel Precast Blocksmall Production Machinery Interlocking Malaysia High Pressure Brick Machine

The whole Magnabloc extruder range offers alternatives for cylindrical,conical or extra-conical auger configurations to better adapt for any product need,type of clay and shaping requirements.


 

Concrete Lintel Precast Blocksmall Production Machinery Interlocking Malaysia High Pressure Brick Machine

The production line is based on soft clay,mud,soil.If your material is shale,fly ash,coal Gangue,or with big stones,grass roots,etc,or you want to buy brick carrying cars or robot,brick stacker, the above line will be adjusted after we get your feedback for your material condition.


 

Welcome To Our Company Hope We Can Have A Good Cooperation.