Cement Brick Block Making Machine Price Mexico/Cement Brick Making Machine Malaysia Qt4-35b

Cement Brick Block Making Machine Price Mexico/Cement Brick Making Machine Malaysia Qt4-35b

For example, assuming that the type and total amount of clay minerals contained in a kind of clay are exactly the same as that in a certain type of shale, plasticity index measured by the geotechnical test method is much higher than shale,because  dispersed clay mineral particles in the clay are uniform and small.If the shale is fully crushed, so that the clay minerals in the shale reach a finely dispersed state like the clay mineral particles contained in the clay, it is possible that the plasticity index measured by the geotechnical test method will be the same as that of the clay.However, it can’t be achieved in actual production,causing a great plasticity fluctuation during processing raw materials such as coal gangue and shale.Which method should be used to describe and compare the plasticity of these raw materials?

Cement Brick Block Making Machine Price Mexico/Cement Brick Making Machine Malaysia Qt4-35b

Advantage:

Low price, lower electricity consumption.

Disadvantage:

There is no vacuum to absorb air and water, the adobe from non-vacuum brick extruder is with more moisture,not much strength as vacuum bricks, also it has high demand for raw material plasticity.

Cement Brick Block Making Machine Price Mexico/Cement Brick Making Machine Malaysia Qt4-35b

JKR40 vacuum brick making machine is one of our most hot sale medium models vacuum extruders.

It is widely used in medium budget brick owners.

The upper stage is with mixers to ensure higher brick quality.

Welcome To Our Company Hope We Can Have A Good Cooperation.