Qt10-15 Full Cement/Concrete Brick Making Machine Vibration Machine

Qt10-15 Full Cement/Concrete Brick Making Machine Vibration Machine

For example, assuming that the type and total amount of clay minerals contained in a kind of clay are exactly the same as that in a certain type of shale, plasticity index measured by the geotechnical test method is much higher than shale,because  dispersed clay mineral particles in the clay are uniform and small.If the shale is fully crushed, so that the clay minerals in the shale reach a finely dispersed state like the clay mineral particles contained in the clay, it is possible that the plasticity index measured by the geotechnical test method will be the same as that of the clay.However, it can’t be achieved in actual production,causing a great plasticity fluctuation during processing raw materials such as coal gangue and shale.Which method should be used to describe and compare the plasticity of these raw materials?

Qt10-15 Full Cement/Concrete Brick Making Machine Vibration Machine

3, The quality of adobe is unstable, sometimes good and sometimes poor.

Reasons: uneven mixing of raw materials

Solutions: Increase the mixer and feeder

Qt10-15 Full Cement/Concrete Brick Making Machine Vibration Machine

Can you guarantee the capacity as you mentioned ?

Yes, we have set running plants abroad,the facts proved that they can achieve the desired output.

Welcome To Our Company Hope We Can Have A Good Cooperation.