Hydraulic Press Brick Machine Qt18-15 Cement Block Laying Machine
From the above table, it can be clearly seen that the plasticity index, dryness sensitivity index, and dry linear shrinkage of the mixture tend to increase with the increase of the particle composition below 0.5 mm in the mixture.This fully shows that the use of geotechnical test method can not fully evaluate the properties of plastic materials such as shale and coal gangue that rely on reducing particle size.From the above analysis, the plasticity degree has a great relationship with the particle size of clay minerals.
Hydraulic Press Brick Machine Qt18-15 Cement Block Laying Machine
There are two kinds of kiln for you to choose: tunnel kiln, hoffman kiln. Hoffman kiln with tunnel dryer is also good for this production line. (cost less than tunnel kiln and more efficient than hoffman kiln) If you want to learnmore information, please contact us.
Hydraulic Press Brick Machine Qt18-15 Cement Block Laying Machine
Machine type:small solid brick making machine
Method: Non-Vacuum Extruder
Auger diameter:300mm
Capacity:4000-6000(pcs/h)
Extruder Power:30kw
Whole production line:70~80kw
Extruding Pressure: 0Mpa
Brick raw material:mud,clay,red soil,etc
Brick type:Solid
Kiln type:Hoffman kiln
