2-10 Cement Brick Block Making Machine Price Nepal Hydraulic Press For Cement Sand Brick

2-10 Cement Brick Block Making Machine Price Nepal Hydraulic Press For Cement Sand Brick

This is still the result after revalidation according to the geotechnical test method,which fully demonstrates that the current geotechnical test method used in the brick and tile industry can’t correctly reflect the characteristics of raw materials such as coal gangue and shale during processing and forming.In order to further prove the fact that raw materials such as shale or coal gangue relys on reducing the particles size to obtain plasticity, the hard shale in a place near Shijiazhuang was crushed into two groups in the laboratory.One group all can pass 0.9 mm sieve; the other can all pass 0.5 mm sieve.However, the shale of the same mineral composition differs greatly in its plasticity index only due to its different grain sizes, one being 4.8% (0.9 mm) and the other being 8.9% (0.5 mm).In order to further verify this phenomenon, this two groups were blended together in different proportions to determine their plasticity index, drying line shrinkage rate and drying sensitivity index. The results are shown in the following table.

2-10 Cement Brick Block Making Machine Price Nepal Hydraulic Press For Cement Sand Brick

JKR mud brick making machine

1.Strong applicability, lower energy consumption, only use one motor.

2.The raw material for making bricks can be clay, coal gangue.

3.It can produce solid,multi-holes and hollow bricks.

2-10 Cement Brick Block Making Machine Price Nepal Hydraulic Press For Cement Sand Brick

JKR35 Brick Manufacturing Machine

1.Strong applicability, high output. Good choice for medium project;

2.The raw material for making bricks can be clay, fly ash, coal gangue, shale, urban construction waste, gangue waste, inferior soil, etc;

3.High vacuum and pressure extrusion and it is good to make strong solid bricks and hollow bricks with qualified holes. The size of solid brick and the holes of hollow bricks can be changed according to your needs;

4.This model is hot sale in Bangladesh, Egypt, Saudi Arabia, Algeria etc.

Welcome To Our Company Hope We Can Have A Good Cooperation.