Qtj4-28 Interlocking Brick Block Machine In Kenya

Qtj4-28 Interlocking Brick Block Machine In Kenya

This is still the result after revalidation according to the geotechnical test method,which fully demonstrates that the current geotechnical test method used in the brick and tile industry can’t correctly reflect the characteristics of raw materials such as coal gangue and shale during processing and forming.In order to further prove the fact that raw materials such as shale or coal gangue relys on reducing the particles size to obtain plasticity, the hard shale in a place near Shijiazhuang was crushed into two groups in the laboratory.One group all can pass 0.9 mm sieve; the other can all pass 0.5 mm sieve.However, the shale of the same mineral composition differs greatly in its plasticity index only due to its different grain sizes, one being 4.8% (0.9 mm) and the other being 8.9% (0.5 mm).In order to further verify this phenomenon, this two groups were blended together in different proportions to determine their plasticity index, drying line shrinkage rate and drying sensitivity index. The results are shown in the following table.

Qtj4-28 Interlocking Brick Block Machine In Kenya

They are mainly made of high quality steel with features of reasonable structure, sturdy and durability.

The machine’s axles, gear and other important spare parts which are made by carbon steel and alloy steel through modulation or quenches heat treatment procession so as to extend the service life.


 

Qtj4-28 Interlocking Brick Block Machine In Kenya

1. Strong applicability, high output. Good choice for big project;

2. The raw material for making bricks can be clay,fly ash,coal gangue,shale,urban construction waste,gangue waste,inferior soil,etc

3. High vacuum and pressure extrusion,can make strong solid bricks and hollow bricks with qualified holes. The size of solid brick and the holes of hollow bricks can be changed according to your needs.

4. This model is hot sale in Bangladesh, Egypt, Saudi Arabia, Algeria etc.

Welcome To Our Company Hope We Can Have A Good Cooperation.