2019 Qt4-24b Semi Automatic Cement Brick Making Machine Price

2019 Qt4-24b Semi Automatic Cement Brick Making Machine Price

This is still the result after revalidation according to the geotechnical test method,which fully demonstrates that the current geotechnical test method used in the brick and tile industry can’t correctly reflect the characteristics of raw materials such as coal gangue and shale during processing and forming.In order to further prove the fact that raw materials such as shale or coal gangue relys on reducing the particles size to obtain plasticity, the hard shale in a place near Shijiazhuang was crushed into two groups in the laboratory.One group all can pass 0.9 mm sieve; the other can all pass 0.5 mm sieve.However, the shale of the same mineral composition differs greatly in its plasticity index only due to its different grain sizes, one being 4.8% (0.9 mm) and the other being 8.9% (0.5 mm).In order to further verify this phenomenon, this two groups were blended together in different proportions to determine their plasticity index, drying line shrinkage rate and drying sensitivity index. The results are shown in the following table.

2019 Qt4-24b Semi Automatic Cement Brick Making Machine Price

You can download our brick machine details and price list on our website: www.yfbrickmachine.com

Non-vacuum brick machine series: JZ250.300, 350,400.

Single Stage Vacuum brick machine: DZK26, 28, 30,35,40,45

2019 Qt4-24b Semi Automatic Cement Brick Making Machine Price

Advantage of Split Double stage vacuum extruder:

1.Strong applicability,higher capacity,lower forming brick moisture content;

2.The raw material for making bricks can be clay,coal gangue,shale powder;

3.It can produce solid,multi-holes and hollow bricks.

Welcome To Our Company Hope We Can Have A Good Cooperation.