Latest Products In Market Convenient Maintenance Manual Interlocking Brick Making Machine And Small Brick Making Machine

Latest Products In Market Convenient Maintenance Manual Interlocking Brick Making Machine And Small Brick Making Machine

This is still the result after revalidation according to the geotechnical test method,which fully demonstrates that the current geotechnical test method used in the brick and tile industry can’t correctly reflect the characteristics of raw materials such as coal gangue and shale during processing and forming.In order to further prove the fact that raw materials such as shale or coal gangue relys on reducing the particles size to obtain plasticity, the hard shale in a place near Shijiazhuang was crushed into two groups in the laboratory.One group all can pass 0.9 mm sieve; the other can all pass 0.5 mm sieve.However, the shale of the same mineral composition differs greatly in its plasticity index only due to its different grain sizes, one being 4.8% (0.9 mm) and the other being 8.9% (0.5 mm).In order to further verify this phenomenon, this two groups were blended together in different proportions to determine their plasticity index, drying line shrinkage rate and drying sensitivity index. The results are shown in the following table.

Latest Products In Market Convenient Maintenance Manual Interlocking Brick Making Machine And Small Brick Making Machine

This equipment is for vacuum extruding and molding the products of fired common brick, fired perforated brick, fired hollow brick, hollow block and etc.

Our extruder has three forms: soft plastic vacuum extruder, semi hard vacuum extruder and hard plastic vacuum extruder.

Latest Products In Market Convenient Maintenance Manual Interlocking Brick Making Machine And Small Brick Making Machine

How to repair clay brick making machine,how to fix clay brick making machine ?

In brick tile machine,  the parts where the soil goes through is easy to be worn out .If we do not repair

the easy wear parts timely, the production will be influeced.

Welcome To Our Company Hope We Can Have A Good Cooperation.