Small Interlocking Mobile Cement Brick Making Machine

Small Interlocking Mobile Cement Brick Making Machine

The plasticity index of common brick clay is relatively stable.In terms of this type of material, which depends on crushing process reducing particle size to obtain plasticity, its plasticity index is variable during processing.For example, when a certain coal gangue is crushed below 0.9 mm in the laboratory, according to geotechnical test method, the plasticity index is measured as only 7.2%.However, after adding 40% of excessively fired vermiculite (essentially no plasticity),then adding water, aging, and crushing on the roller, vacuum extrusion,plasticity index of the small sample actually reached 10.5%.For example, when other shales were crushed to less 0.9 mm, the plasticity index is measured as 8.4% according to geotechnical test method.However, after adding 40% (by weight) of fly ash,then mixing with water, aging, and crushing,plasticity index of the small sample extruded by the vacuum extruder reached 9.5%.

Small Interlocking Mobile Cement Brick Making Machine

Advantage:

Low price, lower electricity consumption.

Disadvantage:

There is no vacuum to absorb air and water, the adobe from non-vacuum brick extruder is with more moisture,not much strength as vacuum bricks, also it has high demand for raw material plasticity.

Small Interlocking Mobile Cement Brick Making Machine

JKR30 can produce solid ,perforated bricks, and hollow bricks.

Its vacuum pressure can reach 2.0 MPA.

It is ideal product for small clay brick factory who wants to get high quality bricks.

Buyer can choose auto clutch or manual clutch.

JKR30 are mostly sold in South America, such as Peru, Argentina, and African countries such as Tanzania, Mozambique, Cameroon, Rwanda, etc.

Welcome To Our Company Hope We Can Have A Good Cooperation.