Smart Interlocking Brick Making Machinery

Smart Interlocking Brick Making Machinery

The plasticity index of common brick clay is relatively stable.In terms of this type of material, which depends on crushing process reducing particle size to obtain plasticity, its plasticity index is variable during processing.For example, when a certain coal gangue is crushed below 0.9 mm in the laboratory, according to geotechnical test method, the plasticity index is measured as only 7.2%.However, after adding 40% of excessively fired vermiculite (essentially no plasticity),then adding water, aging, and crushing on the roller, vacuum extrusion,plasticity index of the small sample actually reached 10.5%.For example, when other shales were crushed to less 0.9 mm, the plasticity index is measured as 8.4% according to geotechnical test method.However, after adding 40% (by weight) of fly ash,then mixing with water, aging, and crushing,plasticity index of the small sample extruded by the vacuum extruder reached 9.5%.

Smart Interlocking Brick Making Machinery

All in all, there are all kinds of raw materials to make bricks, in addition to the different climate, some abnormal situations inevitably occur in the production and it is really hard to avoid. If there are problems, knowing the following two points will be easy. One isto havea team with a strong sense of responsibility and a technical team ofprofessional mechanics. Two is to timely communicate high and difficult technical problems with industry colleagues.

Smart Interlocking Brick Making Machinery

How to repair clay brick making machine,how to fix clay brick making machine ?

In brick tile machine,  the parts where the soil goes through is easy to be worn out .If we do not repair

the easy wear parts timely, the production will be influeced.

Welcome To Our Company Hope We Can Have A Good Cooperation.