2400pcs/Shift Qt4-45 Moving Brick Making Machine For Rwanda Hand Pressed Fly Ash Cement Brick Moulding Machine

2400pcs/Shift Qt4-45 Moving Brick Making Machine For Rwanda Hand Pressed Fly Ash Cement Brick Moulding Machine

According to this method, the plasticity index is used to classify clay as: high plasticity clay >15%; medium plasticity clay 7%-15%; low plasticity clay<7%.

2400pcs/Shift Qt4-45 Moving Brick Making Machine For Rwanda Hand Pressed Fly Ash Cement Brick Moulding Machine

6, Soft adobe, easy to form, or crack after cutting.

Reason: the improper control of moisture in the mud.

Solution: soft adobe, easy to be deformed, showing that the water of sludge is too much, should reduce water. If the mud column quickly occurs crack or split of mud column after molding, which is caused by too little water in mud, it can be solved by increasing appropriate water.

2400pcs/Shift Qt4-45 Moving Brick Making Machine For Rwanda Hand Pressed Fly Ash Cement Brick Moulding Machine

How to repair clay brick making machine,how to fix clay brick making machine ?

In brick tile machine,  the parts where the soil goes through is easy to be worn out .If we do not repair

the easy wear parts timely, the production will be influeced.

Welcome To Our Company Hope We Can Have A Good Cooperation.