M7mi Twin Interlocking Brick Manufacturing Machine

M7mi Twin Interlocking Brick Manufacturing Machine

The plasticity expressing in China’s brick and tile industry is now proposed by the Swedish A. Aterberg in 1911.Plasticity index is expressed as the range of water content when the clay is in a plastic state,whose value is equal to the difference between flow limit and plastic limit.Flow limit, also known as liquid limit, is water amount that clay enters a flowing state.Plastic limit is water amount that clay can be rolled into 3mm diameter.

M7mi Twin Interlocking Brick Manufacturing Machine

Advantage:

Low price, lower electricity consumption.

Disadvantage:

There is no vacuum to absorb air and water, the adobe from non-vacuum brick extruder is with more moisture,not much strength as vacuum bricks, also it has high demand for raw material plasticity.

M7mi Twin Interlocking Brick Manufacturing Machine

Advantages:

1.Strong applicability, lower energy consumption,the extruder only 30 KW;

2.The raw material for making bricks can be ,clay, fly ash,not just clay;

3.Solid brick is the best choice.It can also produce hollow bricks with small holes, if bigger holes, we suggest you choose our bigger power extruder.

Welcome To Our Company Hope We Can Have A Good Cooperation.