Wt2-10 Rubber Interlocking Blocks Brick Press Machine

Wt2-10 Rubber Interlocking Blocks Brick Press Machine

The plasticity expressing in China’s brick and tile industry is now proposed by the Swedish A. Aterberg in 1911.Plasticity index is expressed as the range of water content when the clay is in a plastic state,whose value is equal to the difference between flow limit and plastic limit.Flow limit, also known as liquid limit, is water amount that clay enters a flowing state.Plastic limit is water amount that clay can be rolled into 3mm diameter.

Wt2-10 Rubber Interlocking Blocks Brick Press Machine

You can download our brick machine details and price list on our website: www.yfbrickmachine.com

Non-vacuum brick machine series: JZ250.300, 350,400.

Single Stage Vacuum brick machine: DZK26, 28, 30,35,40,45

Wt2-10 Rubber Interlocking Blocks Brick Press Machine

What’s the difference between Vacuum extruder and non-vacuum extruder?

1) Vacuum brick extruder can make three kinds of brick:solid brick, porous brick and hollow bricks. To produce different kinds of bricks by changing the different brick die;

2) Another type is the common clay brick machine, non vacuum brick extruder, can only produce solid bricks. Vacuum brick is extruded out of the vacuum extruder. And non-vacuum extruder has no extraction equipment, so the brick hardness is lower than vacuum brick;

3) The vacuum brick machine is first extracted with air and water and then fired, the production time and firing time is shorter, rapid prototyping.Greatly reducing the production cycle time.

Welcome To Our Company Hope We Can Have A Good Cooperation.