Hydraform Sand Cement Fly Ash Brick Making Machine

Hydraform Sand Cement Fly Ash Brick Making Machine

 5:Preparation before production

1. organization construction

2. Make plans and regulations

3. Maintain and add equipment

4. Clean up the existing dry site and drying supplies

5. Maintain kiln

6. Maintain electrical equipment

7. Prepare sufficient fuel

8. Preparation of auxiliary items for production

9. Construct road and drainage

10. Prepare raw materials in advance

11. Ensure safety precautions

12. Run a test

13. Prepare spare parts

Hydraform Sand Cement Fly Ash Brick Making Machine

Soft plastic vacuum extruder is suitable for the raw materials with moisture content higher than 19%;the allowed extrusion pressure is 0.4~1.8 MPa.

Semi hard vacuum extruder is suitable for the raw materials with moisture content between 16%~19%;the allowed extrusion pressure is 1.8~2.5 MPa.

Hard plastic vacuum extruder is suitable for the raw materials with moisture content lower than 16%;the allowed extrusion pressure is 2.5~4.5 MPa.

Hydraform Sand Cement Fly Ash Brick Making Machine

Do you have after service?

Yes, we have special service team which will offer you professional guidance. If you need, we can send our engineer to your work site and provide the training for your staff.

Welcome To Our Company Hope We Can Have A Good Cooperation.