Fl1-25 Manual Eco Interlock Block Making Machine Price In Turkey

Fl1-25 Manual Eco Interlock Block Making Machine Price In Turkey

4: Infrastructure construction

After determining production scale, it is possible to determine area, process direction, equipment layout of production plant and the location of living area according to the size of production volume.Plan plant elevation based on local geological, hydrological and meteorological conditions.]Arrange various production workshops according to the wind direction.To determine the mode of production, shall it be labor-intensive companies or technology-intensive enterprises,requires whole careful plan and design by technicians based on the results of technical and economic analysis.

Fl1-25 Manual Eco Interlock Block Making Machine Price In Turkey

The plasticity expressing in China’s brick and tile industry is now proposed by the Swedish A. Aterberg in 1911.Plasticity index is expressed as the range of water content when the clay is in a plastic state,whose value is equal to the difference between flow limit and plastic limit.Flow limit, also known as liquid limit, is water amount that clay enters a flowing state.Plastic limit is water amount that clay can be rolled into 3mm diameter.

Fl1-25 Manual Eco Interlock Block Making Machine Price In Turkey

The plasticity index of common brick clay is relatively stable.In terms of this type of material, which depends on crushing process reducing particle size to obtain plasticity, its plasticity index is variable during processing.For example, when a certain coal gangue is crushed below 0.9 mm in the laboratory, according to geotechnical test method, the plasticity index is measured as only 7.2%.However, after adding 40% of excessively fired vermiculite (essentially no plasticity),then adding water, aging, and crushing on the roller, vacuum extrusion,plasticity index of the small sample actually reached 10.5%.For example, when other shales were crushed to less 0.9 mm, the plasticity index is measured as 8.4% according to geotechnical test method.However, after adding 40% (by weight) of fly ash,then mixing with water, aging, and crushing,plasticity index of the small sample extruded by the vacuum extruder reached 9.5%.

Welcome To Our Company Hope We Can Have A Good Cooperation.