Qt4-25bh Cement Brick Machine South Africa Interlock Brick Making Machine Price

Qt4-25bh Cement Brick Machine South Africa Interlock Brick Making Machine Price

4: Infrastructure construction

After determining production scale, it is possible to determine area, process direction, equipment layout of production plant and the location of living area according to the size of production volume.Plan plant elevation based on local geological, hydrological and meteorological conditions.]Arrange various production workshops according to the wind direction.To determine the mode of production, shall it be labor-intensive companies or technology-intensive enterprises,requires whole careful plan and design by technicians based on the results of technical and economic analysis.

Qt4-25bh Cement Brick Machine South Africa Interlock Brick Making Machine Price

Entry arrangement for overall equipment:

1. box feeder,crusher,roller screen,mixer,belt,precipitator etc in crushing workshop

2. Multi-bucket excavator, reversible spreader

3. Box feeder , mixer, vacuum extruder, cutting and transporting equipments

4. Ferry car,hydraulic pusher,return tractor and hoist.

Qt4-25bh Cement Brick Machine South Africa Interlock Brick Making Machine Price

This is still the result after revalidation according to the geotechnical test method,which fully demonstrates that the current geotechnical test method used in the brick and tile industry can’t correctly reflect the characteristics of raw materials such as coal gangue and shale during processing and forming.In order to further prove the fact that raw materials such as shale or coal gangue relys on reducing the particles size to obtain plasticity, the hard shale in a place near Shijiazhuang was crushed into two groups in the laboratory.One group all can pass 0.9 mm sieve; the other can all pass 0.5 mm sieve.However, the shale of the same mineral composition differs greatly in its plasticity index only due to its different grain sizes, one being 4.8% (0.9 mm) and the other being 8.9% (0.5 mm).In order to further verify this phenomenon, this two groups were blended together in different proportions to determine their plasticity index, drying line shrinkage rate and drying sensitivity index. The results are shown in the following table.

Welcome To Our Company Hope We Can Have A Good Cooperation.