Interlocking Brick Machine Paving Brick Production Line Qtj4-40b Brick Cement Blocks Making Machine For Building

Interlocking Brick Machine Paving Brick Production Line Qtj4-40b Brick Cement Blocks Making Machine For Building

2: Confirm brick type

Formulate product production plan according to the condition of raw materials.When you build a new factory, you must have a clear understanding of the local production materials.After determining the dosing plan and selecting raw materials, we must determine the production plan and scale according to local market conditions. It is suitable for hollow brick or hole brick?Whether annual production scale should be 50 million or 80 million?

Interlocking Brick Machine Paving Brick Production Line Qtj4-40b Brick Cement Blocks Making Machine For Building

The plasticity expressing in China’s brick and tile industry is now proposed by the Swedish A. Aterberg in 1911.Plasticity index is expressed as the range of water content when the clay is in a plastic state,whose value is equal to the difference between flow limit and plastic limit.Flow limit, also known as liquid limit, is water amount that clay enters a flowing state.Plastic limit is water amount that clay can be rolled into 3mm diameter.

Interlocking Brick Machine Paving Brick Production Line Qtj4-40b Brick Cement Blocks Making Machine For Building

From the above table, it can be clearly seen that the plasticity index, dryness sensitivity index, and dry linear shrinkage of the mixture tend to increase with the increase of the particle composition below 0.5 mm in the mixture.This fully shows that the use of geotechnical test method can not fully evaluate the properties of plastic materials such as shale and coal gangue that rely on reducing particle size.From the above analysis, the plasticity degree has a great relationship with the particle size of clay minerals.

Welcome To Our Company Hope We Can Have A Good Cooperation.