High Quality Manual Interlocking Paver Hollow Concrete Brick Making Machine

High Quality Manual Interlocking Paver Hollow Concrete Brick Making Machine

If the residual moisture rate after drying is less than 6%,the wet billet could be fired in the baking kiln.Hoffman kiln and tunnel kiln are normally used for roasting.When using Hoffman kiln, the brick code is manually placed in the kiln and the fire is roasted in the kiln.When using tunnel kiln,the brick code is manually or mechanically placed in the kiln cart.The kiln car enters kiln head and exits from the kiln tail. The brick blanks on the kiln car are roasted into bricks.The roasting flame in the kiln doesn’t move just the kiln cart.Whether using Hoffman kiln or tunnel kiln,this two conditions must be followed:1.never use underfire to produce unburnt brick.2.never use big fire to produce coke brick.It is often said that roasting is the key of the brick making process,which explains the importance of roasting in the brick making process.

High Quality Manual Interlocking Paver Hollow Concrete Brick Making Machine

The whole Magnabloc extruder range offers alternatives for cylindrical,conical or extra-conical auger configurations to better adapt for any product need,type of clay and shaping requirements.


 

High Quality Manual Interlocking Paver Hollow Concrete Brick Making Machine

The raw material for making bricks can be ,clay, fly ash,soil.

JZC300 extruder is for non-vacuum soild clay bricks, however, if you want to make hollow or multi-hole bricks,We can also change the non-vacuum into vacuum ,so as to produce hollow or multi-hole bricks.

Welcome To Our Company Hope We Can Have A Good Cooperation.