Giantlin Qt4-10 Full Automatic Interlocking Solid Brick Molding Machine

Giantlin Qt4-10 Full Automatic Interlocking Solid Brick Molding Machine

If the residual moisture rate after drying is less than 6%,the wet billet could be fired in the baking kiln.Hoffman kiln and tunnel kiln are normally used for roasting.When using Hoffman kiln, the brick code is manually placed in the kiln and the fire is roasted in the kiln.When using tunnel kiln,the brick code is manually or mechanically placed in the kiln cart.The kiln car enters kiln head and exits from the kiln tail. The brick blanks on the kiln car are roasted into bricks.The roasting flame in the kiln doesn’t move just the kiln cart.Whether using Hoffman kiln or tunnel kiln,this two conditions must be followed:1.never use underfire to produce unburnt brick.2.never use big fire to produce coke brick.It is often said that roasting is the key of the brick making process,which explains the importance of roasting in the brick making process.

Giantlin Qt4-10 Full Automatic Interlocking Solid Brick Molding Machine

Molding workshop:including the feeding box, mixer, clay machine, extruder, cutting and transportation construction, as well as the kiln base after pouring belt,top car machine, tractor, kiln channel pavement, cushion and other construction.

Giantlin Qt4-10 Full Automatic Interlocking Solid Brick Molding Machine

According to this method, the plasticity index is used to classify clay as: high plasticity clay >15%; medium plasticity clay 7%-15%; low plasticity clay<7%.

Welcome To Our Company Hope We Can Have A Good Cooperation.