High Capacity Qt4-16 Full Automatic Concrete Interlock Brick Block Making Machine

High Capacity Qt4-16 Full Automatic Concrete Interlock Brick Block Making Machine

If the residual moisture rate after drying is less than 6%,the wet billet could be fired in the baking kiln.Hoffman kiln and tunnel kiln are normally used for roasting.When using Hoffman kiln, the brick code is manually placed in the kiln and the fire is roasted in the kiln.When using tunnel kiln,the brick code is manually or mechanically placed in the kiln cart.The kiln car enters kiln head and exits from the kiln tail. The brick blanks on the kiln car are roasted into bricks.The roasting flame in the kiln doesn’t move just the kiln cart.Whether using Hoffman kiln or tunnel kiln,this two conditions must be followed:1.never use underfire to produce unburnt brick.2.never use big fire to produce coke brick.It is often said that roasting is the key of the brick making process,which explains the importance of roasting in the brick making process.

High Capacity Qt4-16 Full Automatic Concrete Interlock Brick Block Making Machine

Basic elements:

1. raw materials   2.water   3.electricity   4 land   5.fund

High Capacity Qt4-16 Full Automatic Concrete Interlock Brick Block Making Machine

 3: Confirm the production process and equipment

Selected production process and equipment according to raw materials.Clarify your raw material properties before starting new plant.Please have experienced technical staff to plan the production route and conduct selection or design production equipment.Not all equipment can adapt to your raw materials.

Welcome To Our Company Hope We Can Have A Good Cooperation.