Manual Concrete Cement Brick And Block Making Moulding Machines For Sale

Manual Concrete Cement Brick And Block Making Moulding Machines For Sale

The natural drying is to place the wet billet on the billet stalk in the natural drying place,manually invert the code and use the atmosphere to wet the cold billet into a dry billet.Artificial drying is to use equipped artificial drying chamber to dry wet billet.The artificial drying room is divided into three types: large-section tunnel drying room, small-section tunnel drying room and chamber drying room.Whichever type is adopted, it is manually or mechanically placing wet billet on a drying truck,then put it into drying chamber.The heat medium in the drying chamber generally comes from the waste heat of the sintering kiln or the hot blast stove.Whichever drying method is adopted, it must be ensured that the blank will not be deformed or chapped during the drying process.If the wet billet can’t guarantee the appearance quality of the product during drying, it will cause high reject rate, falling output,increasing cost of the finished brick, which are definitely harmful to company economic efficiency.This shows the importance of drying wet billet in brick making process.

Manual Concrete Cement Brick And Block Making Moulding Machines For Sale

1. Strong applicability, high output. Good choice for big project;

2. The raw material for making bricks can be clay,fly ash,coal gangue,shale,urban construction waste,gangue waste,inferior soil,etc

3. High vacuum and pressure extrusion,can make strong solid bricks and hollow bricks with qualified holes. The size of solid brick and the holes of hollow bricks can be changed according to your needs.

4. This model is hot sale in Bangladesh, Egypt, Saudi Arabia, Algeria etc.

Manual Concrete Cement Brick And Block Making Moulding Machines For Sale

Machine type:small solid brick making machine

Method: Non-Vacuum Extruder

Auger diameter:300mm

Capacity:4000-6000(pcs/h)

Extruder Power:30kw

Whole production line:70~80kw

Extruding Pressure: 0Mpa

Brick raw material:mud,clay,red soil,etc

Brick type:Solid

Kiln type:Hoffman kiln

Welcome To Our Company Hope We Can Have A Good Cooperation.