Mt18-25 Eco Friendly Cement Commercial Sand Brick Making Machine

Mt18-25 Eco Friendly Cement Commercial Sand Brick Making Machine

The natural drying is to place the wet billet on the billet stalk in the natural drying place,manually invert the code and use the atmosphere to wet the cold billet into a dry billet.Artificial drying is to use equipped artificial drying chamber to dry wet billet.The artificial drying room is divided into three types: large-section tunnel drying room, small-section tunnel drying room and chamber drying room.Whichever type is adopted, it is manually or mechanically placing wet billet on a drying truck,then put it into drying chamber.The heat medium in the drying chamber generally comes from the waste heat of the sintering kiln or the hot blast stove.Whichever drying method is adopted, it must be ensured that the blank will not be deformed or chapped during the drying process.If the wet billet can’t guarantee the appearance quality of the product during drying, it will cause high reject rate, falling output,increasing cost of the finished brick, which are definitely harmful to company economic efficiency.This shows the importance of drying wet billet in brick making process.

Mt18-25 Eco Friendly Cement Commercial Sand Brick Making Machine

JKR30 can produce solid ,perforated bricks, and hollow bricks.

Its vacuum pressure can reach 2.0 MPA.

It is ideal product for small clay brick factory who wants to get high quality bricks.

Buyer can choose auto clutch or manual clutch.

JKR30 are mostly sold in South America, such as Peru, Argentina, and African countries such as Tanzania, Mozambique, Cameroon, Rwanda, etc.

Mt18-25 Eco Friendly Cement Commercial Sand Brick Making Machine

Most of the hot-selling countries of JKR40 are in Central Asia, such as Uzbekistan, Turkmenistan, and some African countries, such as Malawi.


 

Welcome To Our Company Hope We Can Have A Good Cooperation.