Brick Maker Machines Qt8-15 Automatic Cement Concrete Brick Making Machine

Brick Maker Machines Qt8-15 Automatic Cement Concrete Brick Making Machine

The natural drying is to place the wet billet on the billet stalk in the natural drying place,manually invert the code and use the atmosphere to wet the cold billet into a dry billet.Artificial drying is to use equipped artificial drying chamber to dry wet billet.The artificial drying room is divided into three types: large-section tunnel drying room, small-section tunnel drying room and chamber drying room.Whichever type is adopted, it is manually or mechanically placing wet billet on a drying truck,then put it into drying chamber.The heat medium in the drying chamber generally comes from the waste heat of the sintering kiln or the hot blast stove.Whichever drying method is adopted, it must be ensured that the blank will not be deformed or chapped during the drying process.If the wet billet can’t guarantee the appearance quality of the product during drying, it will cause high reject rate, falling output,increasing cost of the finished brick, which are definitely harmful to company economic efficiency.This shows the importance of drying wet billet in brick making process.

Brick Maker Machines Qt8-15 Automatic Cement Concrete Brick Making Machine

Different types of augers are available to adapt for varying clay requirements and shaping conditions:

1.Highly wear resistant chromium alloy

2.Steel alloys with chromium or tungsten carbides resurfacing

3.Steel alloy

Brick Maker Machines Qt8-15 Automatic Cement Concrete Brick Making Machine

The raw material for making bricks can be ,clay, fly ash,soil.

JZC300 extruder is for non-vacuum soild clay bricks, however, if you want to make hollow or multi-hole bricks,We can also change the non-vacuum into vacuum ,so as to produce hollow or multi-hole bricks.

Welcome To Our Company Hope We Can Have A Good Cooperation.