New Type Qt4-15 Full Automatic Australia Cement Brick Making Machine

New Type Qt4-15 Full Automatic Australia Cement Brick Making Machine

The natural drying is to place the wet billet on the billet stalk in the natural drying place,manually invert the code and use the atmosphere to wet the cold billet into a dry billet.Artificial drying is to use equipped artificial drying chamber to dry wet billet.The artificial drying room is divided into three types: large-section tunnel drying room, small-section tunnel drying room and chamber drying room.Whichever type is adopted, it is manually or mechanically placing wet billet on a drying truck,then put it into drying chamber.The heat medium in the drying chamber generally comes from the waste heat of the sintering kiln or the hot blast stove.Whichever drying method is adopted, it must be ensured that the blank will not be deformed or chapped during the drying process.If the wet billet can’t guarantee the appearance quality of the product during drying, it will cause high reject rate, falling output,increasing cost of the finished brick, which are definitely harmful to company economic efficiency.This shows the importance of drying wet billet in brick making process.

New Type Qt4-15 Full Automatic Australia Cement Brick Making Machine

They are mainly made of high quality steel with features of reasonable structure, sturdy and durability.

The machine’s axles, gear and other important spare parts which are made by carbon steel and alloy steel through modulation or quenches heat treatment procession so as to extend the service life.


 

New Type Qt4-15 Full Automatic Australia Cement Brick Making Machine

Non-vacuum brick extruder is with the most simple structure,generally speaking,it only produces solid bricks,such machine is suitable for small budget clients who want to produce solid bricks.


 

Welcome To Our Company Hope We Can Have A Good Cooperation.