Brick Moulding Machine Qt8-15 Block Making Machine Cement Brick Plant

Brick Moulding Machine Qt8-15 Block Making Machine Cement Brick Plant

The natural drying is to place the wet billet on the billet stalk in the natural drying place,manually invert the code and use the atmosphere to wet the cold billet into a dry billet.Artificial drying is to use equipped artificial drying chamber to dry wet billet.The artificial drying room is divided into three types: large-section tunnel drying room, small-section tunnel drying room and chamber drying room.Whichever type is adopted, it is manually or mechanically placing wet billet on a drying truck,then put it into drying chamber.The heat medium in the drying chamber generally comes from the waste heat of the sintering kiln or the hot blast stove.Whichever drying method is adopted, it must be ensured that the blank will not be deformed or chapped during the drying process.If the wet billet can’t guarantee the appearance quality of the product during drying, it will cause high reject rate, falling output,increasing cost of the finished brick, which are definitely harmful to company economic efficiency.This shows the importance of drying wet billet in brick making process.

Brick Moulding Machine Qt8-15 Block Making Machine Cement Brick Plant

But what materials we should use to repair the easy wear parts ?

Usually we use A3 Carbon steel to repair the extruder auger and liner, double shaft mixer blades etc.

However, we find that after the Carbon steel can not fit for long time wear resistant requirment. 

Brick Moulding Machine Qt8-15 Block Making Machine Cement Brick Plant

Advantage of Split Double stage vacuum extruder:

1.Strong applicability,higher capacity,lower forming brick moisture content;

2.The raw material for making bricks can be clay,coal gangue,shale powder;

3.It can produce solid,multi-holes and hollow bricks.

Welcome To Our Company Hope We Can Have A Good Cooperation.