Interlocking Manual Brick Making Machine Design

Interlocking Manual Brick Making Machine Design

The natural drying is to place the wet billet on the billet stalk in the natural drying place,manually invert the code and use the atmosphere to wet the cold billet into a dry billet.Artificial drying is to use equipped artificial drying chamber to dry wet billet.The artificial drying room is divided into three types: large-section tunnel drying room, small-section tunnel drying room and chamber drying room.Whichever type is adopted, it is manually or mechanically placing wet billet on a drying truck,then put it into drying chamber.The heat medium in the drying chamber generally comes from the waste heat of the sintering kiln or the hot blast stove.Whichever drying method is adopted, it must be ensured that the blank will not be deformed or chapped during the drying process.If the wet billet can’t guarantee the appearance quality of the product during drying, it will cause high reject rate, falling output,increasing cost of the finished brick, which are definitely harmful to company economic efficiency.This shows the importance of drying wet billet in brick making process.

Interlocking Manual Brick Making Machine Design

7. Brick production capacity not stable

Reason: Not equip with box feeder

Solution : Some brick factory owners in order to save money, they refuse to use box feeder but some labors to feed soil manually .Therefore, soil feeding amount is not stable,sometimes more than what the extruder need, some times, less what extruder need, thus greatly influencing production capacity.

Interlocking Manual Brick Making Machine Design

DZK series clay brick making machine is divided into Double stage vacuum extruder and single stage vacuum extruder:

1) Double stage Vacuum brick extruder can make three kinds of brick, solid brick, porous brick and hollow bricks. To produce different kinds of bricks, usually, only need to fix different brick die. It is composed of upper stage mixing parts and lower stage extruding parts;

2) Single stage vacuum extruder usually can produce solid bricks. It has only lower stage extruding parts;

Welcome To Our Company Hope We Can Have A Good Cooperation.