Automatic Interlocking Block Machine For Sale Made In China

Automatic Interlocking Block Machine For Sale Made In China

The natural drying is to place the wet billet on the billet stalk in the natural drying place,manually invert the code and use the atmosphere to wet the cold billet into a dry billet.Artificial drying is to use equipped artificial drying chamber to dry wet billet.The artificial drying room is divided into three types: large-section tunnel drying room, small-section tunnel drying room and chamber drying room.Whichever type is adopted, it is manually or mechanically placing wet billet on a drying truck,then put it into drying chamber.The heat medium in the drying chamber generally comes from the waste heat of the sintering kiln or the hot blast stove.Whichever drying method is adopted, it must be ensured that the blank will not be deformed or chapped during the drying process.If the wet billet can’t guarantee the appearance quality of the product during drying, it will cause high reject rate, falling output,increasing cost of the finished brick, which are definitely harmful to company economic efficiency.This shows the importance of drying wet billet in brick making process.

Automatic Interlocking Block Machine For Sale Made In China

4, malformed adobe and mud column, will spread immediately after cutting.

Reasons: Failure of the vacuum chamber

Automatic Interlocking Block Machine For Sale Made In China

6, Soft adobe, easy to form, or crack after cutting.

Reason: the improper control of moisture in the mud.

Solution: soft adobe, easy to be deformed, showing that the water of sludge is too much, should reduce water. If the mud column quickly occurs crack or split of mud column after molding, which is caused by too little water in mud, it can be solved by increasing appropriate water.

Welcome To Our Company Hope We Can Have A Good Cooperation.