Neweek Interlocking Cement Brick Machine Hollow Block Molder In Sri Lanka

Neweek Interlocking Cement Brick Machine Hollow Block Molder In Sri Lanka

The natural drying is to place the wet billet on the billet stalk in the natural drying place,manually invert the code and use the atmosphere to wet the cold billet into a dry billet.Artificial drying is to use equipped artificial drying chamber to dry wet billet.The artificial drying room is divided into three types: large-section tunnel drying room, small-section tunnel drying room and chamber drying room.Whichever type is adopted, it is manually or mechanically placing wet billet on a drying truck,then put it into drying chamber.The heat medium in the drying chamber generally comes from the waste heat of the sintering kiln or the hot blast stove.Whichever drying method is adopted, it must be ensured that the blank will not be deformed or chapped during the drying process.If the wet billet can’t guarantee the appearance quality of the product during drying, it will cause high reject rate, falling output,increasing cost of the finished brick, which are definitely harmful to company economic efficiency.This shows the importance of drying wet billet in brick making process.

Neweek Interlocking Cement Brick Machine Hollow Block Molder In Sri Lanka

Molding workshop:including the feeding box, mixer, clay machine, extruder, cutting and transportation construction, as well as the kiln base after pouring belt,top car machine, tractor, kiln channel pavement, cushion and other construction.

Neweek Interlocking Cement Brick Machine Hollow Block Molder In Sri Lanka

The plasticity expressing in China’s brick and tile industry is now proposed by the Swedish A. Aterberg in 1911.Plasticity index is expressed as the range of water content when the clay is in a plastic state,whose value is equal to the difference between flow limit and plastic limit.Flow limit, also known as liquid limit, is water amount that clay enters a flowing state.Plastic limit is water amount that clay can be rolled into 3mm diameter.

Welcome To Our Company Hope We Can Have A Good Cooperation.