Qt4-30 Diesel Engine Interlock Cement Brick Making Machine In Sri Lanka

Qt4-30 Diesel Engine Interlock Cement Brick Making Machine In Sri Lanka

These three extrusion methods are based on the difference in the moisture content of the molding.When the moisture content more than 16%,wet billet molding is plastic extrusion molding. When the moisture content equals 14-16%, it’s semi-hard plastic extrusion molding. When the moisture content equals 12-14% ,it’s hard plastic extrusion molding.Blank forming includes: feeding material , mixing,adding water and grinding equipment processing before raw materials entering the molding shop not brick extruding machine.After passing through the molding brick machine, the qualified mud and wet billet are formed.Forming process should fulfill the requirement of the shape and structure.Forming is the foundation of the brick making process.The quality of the formed body is directly related to the appearance quality of the finished tile.

After the wet billets formed from the molding plant, they need to be dried by dehydration.In the production process of sintered bricks, there are two ways of drying wet blank: natural drying and artificial drying.

Qt4-30 Diesel Engine Interlock Cement Brick Making Machine In Sri Lanka

Machine type:small solid brick making machine

Method: Non-Vacuum Extruder

Auger diameter:300mm

Capacity:4000-6000(pcs/h)

Extruder Power:30kw

Whole production line:70~80kw

Extruding Pressure: 0Mpa

Brick raw material:mud,clay,red soil,etc

Brick type:Solid

Kiln type:Hoffman kiln

Qt4-30 Diesel Engine Interlock Cement Brick Making Machine In Sri Lanka

Advantages:

1.Strong applicability, lower energy consumption,the extruder only 30 KW;

2.The raw material for making bricks can be ,clay, fly ash,not just clay;

3.Solid brick is the best choice.It can also produce hollow bricks with small holes, if bigger holes, we suggest you choose our bigger power extruder.

Welcome To Our Company Hope We Can Have A Good Cooperation.