Qtj4-40 Used Cement Brick Maker Machine Low Investment In Tanzania

Qtj4-40 Used Cement Brick Maker Machine Low Investment In Tanzania

These three extrusion methods are based on the difference in the moisture content of the molding.When the moisture content more than 16%,wet billet molding is plastic extrusion molding. When the moisture content equals 14-16%, it’s semi-hard plastic extrusion molding. When the moisture content equals 12-14% ,it’s hard plastic extrusion molding.Blank forming includes: feeding material , mixing,adding water and grinding equipment processing before raw materials entering the molding shop not brick extruding machine.After passing through the molding brick machine, the qualified mud and wet billet are formed.Forming process should fulfill the requirement of the shape and structure.Forming is the foundation of the brick making process.The quality of the formed body is directly related to the appearance quality of the finished tile.

After the wet billets formed from the molding plant, they need to be dried by dehydration.In the production process of sintered bricks, there are two ways of drying wet blank: natural drying and artificial drying.

Qtj4-40 Used Cement Brick Maker Machine Low Investment In Tanzania

This JZC300 is now working in India well, after testing, it is proved that the design of this model machine is successful ,therefore there is no technology risk.

It has 4S : Saving labor, Saving electricity, Saving land, Saving Money.


 

Qtj4-40 Used Cement Brick Maker Machine Low Investment In Tanzania

The raw material for making bricks can be ,clay, fly ash,soil.

JZC300 extruder is for non-vacuum soild clay bricks, however, if you want to make hollow or multi-hole bricks,We can also change the non-vacuum into vacuum ,so as to produce hollow or multi-hole bricks.

Welcome To Our Company Hope We Can Have A Good Cooperation.