Qmy6-25 Australia Cement Brick Making Machine

Qmy6-25 Australia Cement Brick Making Machine

These three extrusion methods are based on the difference in the moisture content of the molding.When the moisture content more than 16%,wet billet molding is plastic extrusion molding. When the moisture content equals 14-16%, it’s semi-hard plastic extrusion molding. When the moisture content equals 12-14% ,it’s hard plastic extrusion molding.Blank forming includes: feeding material , mixing,adding water and grinding equipment processing before raw materials entering the molding shop not brick extruding machine.After passing through the molding brick machine, the qualified mud and wet billet are formed.Forming process should fulfill the requirement of the shape and structure.Forming is the foundation of the brick making process.The quality of the formed body is directly related to the appearance quality of the finished tile.

After the wet billets formed from the molding plant, they need to be dried by dehydration.In the production process of sintered bricks, there are two ways of drying wet blank: natural drying and artificial drying.

Qmy6-25 Australia Cement Brick Making Machine

VP Hard plastic vacuum brick extruder USA technology

1. Reducing raw materail moisture, lower drying cost

2. It is suitable for low, medium and high plastic raw material 

3.It is suitable for one and twice stacking ,therefore simplying production chart, saving investment

4.Finished product with higher density and higher strenger,not easy to be damaged while pakcing ,transporting and construction.

 

Qmy6-25 Australia Cement Brick Making Machine

JKY series red brick making machine are our advanced twin-stage vacuum extruders which draw advanced experience from the developed. and domestic technology .

It is suitable for big factory and those who have high demand on brick quality.


 

Welcome To Our Company Hope We Can Have A Good Cooperation.