Factory Concrete Paver Sidewalk Block Interlocking Paving Brick Machine In Malaysia

Factory Concrete Paver Sidewalk Block Interlocking Paving Brick Machine In Malaysia

These three extrusion methods are based on the difference in the moisture content of the molding.When the moisture content more than 16%,wet billet molding is plastic extrusion molding. When the moisture content equals 14-16%, it’s semi-hard plastic extrusion molding. When the moisture content equals 12-14% ,it’s hard plastic extrusion molding.Blank forming includes: feeding material , mixing,adding water and grinding equipment processing before raw materials entering the molding shop not brick extruding machine.After passing through the molding brick machine, the qualified mud and wet billet are formed.Forming process should fulfill the requirement of the shape and structure.Forming is the foundation of the brick making process.The quality of the formed body is directly related to the appearance quality of the finished tile.

After the wet billets formed from the molding plant, they need to be dried by dehydration.In the production process of sintered bricks, there are two ways of drying wet blank: natural drying and artificial drying.

Factory Concrete Paver Sidewalk Block Interlocking Paving Brick Machine In Malaysia

Any kinds of soil can be used for making bricks?

Most of soil can be used for making bricks, but soil plasticity must be between 5 to 17. If the soil plasticity is too big or too small, you need to add additional material in the soil.

Factory Concrete Paver Sidewalk Block Interlocking Paving Brick Machine In Malaysia

Are your products qualified?

All of our machines hold the ISO, QC certificate, and each set of machine must pass a great number of strict testing ensure to offer the best quality to our customers.

Welcome To Our Company Hope We Can Have A Good Cooperation.