Australia Cement Brick Making Machine Qt6-15 Brick Machine Sri Lanka Brick Making Machine South Korea

Australia Cement Brick Making Machine Qt6-15 Brick Machine Sri Lanka Brick Making Machine South Korea

These three extrusion methods are based on the difference in the moisture content of the molding.When the moisture content more than 16%,wet billet molding is plastic extrusion molding. When the moisture content equals 14-16%, it’s semi-hard plastic extrusion molding. When the moisture content equals 12-14% ,it’s hard plastic extrusion molding.Blank forming includes: feeding material , mixing,adding water and grinding equipment processing before raw materials entering the molding shop not brick extruding machine.After passing through the molding brick machine, the qualified mud and wet billet are formed.Forming process should fulfill the requirement of the shape and structure.Forming is the foundation of the brick making process.The quality of the formed body is directly related to the appearance quality of the finished tile.

After the wet billets formed from the molding plant, they need to be dried by dehydration.In the production process of sintered bricks, there are two ways of drying wet blank: natural drying and artificial drying.

Australia Cement Brick Making Machine Qt6-15 Brick Machine Sri Lanka Brick Making Machine South Korea

Advantage of Split Double stage vacuum extruder:

1.Strong applicability,higher capacity,lower forming brick moisture content;

2.The raw material for making bricks can be clay,coal gangue,shale powder;

3.It can produce solid,multi-holes and hollow bricks.

Australia Cement Brick Making Machine Qt6-15 Brick Machine Sri Lanka Brick Making Machine South Korea

Less than 8% of dry brick can be sintered, if the water moisture is too large, the brick will be easy to crack at the sintering time.

Welcome To Our Company Hope We Can Have A Good Cooperation.