Hollow Brick Making Machine Qmj-6a Egg Laying Brick Making Machine Japan Interlocking Brick Machine Thailand

Hollow Brick Making Machine Qmj-6a Egg Laying Brick Making Machine Japan Interlocking Brick Machine Thailand

These three extrusion methods are based on the difference in the moisture content of the molding.When the moisture content more than 16%,wet billet molding is plastic extrusion molding. When the moisture content equals 14-16%, it’s semi-hard plastic extrusion molding. When the moisture content equals 12-14% ,it’s hard plastic extrusion molding.Blank forming includes: feeding material , mixing,adding water and grinding equipment processing before raw materials entering the molding shop not brick extruding machine.After passing through the molding brick machine, the qualified mud and wet billet are formed.Forming process should fulfill the requirement of the shape and structure.Forming is the foundation of the brick making process.The quality of the formed body is directly related to the appearance quality of the finished tile.

After the wet billets formed from the molding plant, they need to be dried by dehydration.In the production process of sintered bricks, there are two ways of drying wet blank: natural drying and artificial drying.

Hollow Brick Making Machine Qmj-6a Egg Laying Brick Making Machine Japan Interlocking Brick Machine Thailand

All in all, there are all kinds of raw materials to make bricks, in addition to the different climate, some abnormal situations inevitably occur in the production and it is really hard to avoid. If there are problems, knowing the following two points will be easy. One isto havea team with a strong sense of responsibility and a technical team ofprofessional mechanics. Two is to timely communicate high and difficult technical problems with industry colleagues.

Hollow Brick Making Machine Qmj-6a Egg Laying Brick Making Machine Japan Interlocking Brick Machine Thailand

This equipment is for vacuum extruding and molding the products of fired common brick, fired perforated brick, fired hollow brick, hollow block and etc.

Our extruder has three forms: soft plastic vacuum extruder, semi hard vacuum extruder and hard plastic vacuum extruder.

Welcome To Our Company Hope We Can Have A Good Cooperation.