Hallow Block Making Machine Qtj4-25 China Building Construction Automatic Cement Brick Machine In Sri Lanka Brick Equipment

Hallow Block Making Machine Qtj4-25 China Building Construction Automatic Cement Brick Machine In Sri Lanka Brick Equipment

These three extrusion methods are based on the difference in the moisture content of the molding.When the moisture content more than 16%,wet billet molding is plastic extrusion molding. When the moisture content equals 14-16%, it’s semi-hard plastic extrusion molding. When the moisture content equals 12-14% ,it’s hard plastic extrusion molding.Blank forming includes: feeding material , mixing,adding water and grinding equipment processing before raw materials entering the molding shop not brick extruding machine.After passing through the molding brick machine, the qualified mud and wet billet are formed.Forming process should fulfill the requirement of the shape and structure.Forming is the foundation of the brick making process.The quality of the formed body is directly related to the appearance quality of the finished tile.

After the wet billets formed from the molding plant, they need to be dried by dehydration.In the production process of sintered bricks, there are two ways of drying wet blank: natural drying and artificial drying.

Hallow Block Making Machine Qtj4-25 China Building Construction Automatic Cement Brick Machine In Sri Lanka Brick Equipment

If the residual moisture rate after drying is less than 6%,the wet billet could be fired in the baking kiln.Hoffman kiln and tunnel kiln are normally used for roasting.When using Hoffman kiln, the brick code is manually placed in the kiln and the fire is roasted in the kiln.When using tunnel kiln,the brick code is manually or mechanically placed in the kiln cart.The kiln car enters kiln head and exits from the kiln tail. The brick blanks on the kiln car are roasted into bricks.The roasting flame in the kiln doesn’t move just the kiln cart.Whether using Hoffman kiln or tunnel kiln,this two conditions must be followed:1.never use underfire to produce unburnt brick.2.never use big fire to produce coke brick.It is often said that roasting is the key of the brick making process,which explains the importance of roasting in the brick making process.

Hallow Block Making Machine Qtj4-25 China Building Construction Automatic Cement Brick Machine In Sri Lanka Brick Equipment

Sintered brick process is composed of four parts.To sum up,it is said that the raw material is fundamental,molding is the basis,drying is ensure and roasting is the key. These four parts are interdependent.

Welcome To Our Company Hope We Can Have A Good Cooperation.