Automated Brick Factory Qt10-15 Interlocking Block Machine Canada

Automated Brick Factory Qt10-15 Interlocking Block Machine Canada

After the selected brick raw materials are processed, they enter the molding workshop for molding.Blank forming method basically uses plastic extrusion molding in China.There are three methods for plastic extrusion. That is plastic extrusion molding,semi-hard plastic extrusion molding and hard plastic extrusion molding.

Automated Brick Factory Qt10-15 Interlocking Block Machine Canada

All in all, there are all kinds of raw materials to make bricks, in addition to the different climate, some abnormal situations inevitably occur in the production and it is really hard to avoid. If there are problems, knowing the following two points will be easy. One isto havea team with a strong sense of responsibility and a technical team ofprofessional mechanics. Two is to timely communicate high and difficult technical problems with industry colleagues.

Automated Brick Factory Qt10-15 Interlocking Block Machine Canada

Soft plastic vacuum extruder is suitable for the raw materials with moisture content higher than 19%;the allowed extrusion pressure is 0.4~1.8 MPa.

Semi hard vacuum extruder is suitable for the raw materials with moisture content between 16%~19%;the allowed extrusion pressure is 1.8~2.5 MPa.

Hard plastic vacuum extruder is suitable for the raw materials with moisture content lower than 16%;the allowed extrusion pressure is 2.5~4.5 MPa.

Welcome To Our Company Hope We Can Have A Good Cooperation.