Qt4-15 Cement Interlocking Brick Making Machine

Qt4-15 Cement Interlocking Brick Making Machine

After the selected brick raw materials are processed, they enter the molding workshop for molding.Blank forming method basically uses plastic extrusion molding in China.There are three methods for plastic extrusion. That is plastic extrusion molding,semi-hard plastic extrusion molding and hard plastic extrusion molding.

Qt4-15 Cement Interlocking Brick Making Machine

 b, Another reason for resulting in failure of the vacuum chamber, is the sand-based raw material, so the closed mud layer of the upper auger is too thin, easy to be drawn through, causing the vacuum failure, so the adobe could not be molded. The best way to solve this problem is to change the ratio of raw materials, to increase the plasticity index of raw materials. The other way is to cut the front end of the superiors auger to 2-10 centimeters according to the material properties of soil (must be conducted under the guidance of skilled technical personnel, don’t do it by yourself).

Qt4-15 Cement Interlocking Brick Making Machine

6, Soft adobe, easy to form, or crack after cutting.

Reason: the improper control of moisture in the mud.

Solution: soft adobe, easy to be deformed, showing that the water of sludge is too much, should reduce water. If the mud column quickly occurs crack or split of mud column after molding, which is caused by too little water in mud, it can be solved by increasing appropriate water.

Welcome To Our Company Hope We Can Have A Good Cooperation.