Wall Building Material Machinery Hfb5 230a Cement Brick Making Machine

Wall Building Material Machinery Hfb5 230a Cement Brick Making Machine

The production process of sintered bricks is generally composed of four parts: raw material preparation, blank body forming, wet blank drying, and finished product firing.After raw materials are excavated, some can be processed by adding water, stirring and grinding equipment,while others will not work.Raw materials,such as mountain soil, coal gangue and shale,are to be broken and finely chopped, then followed by water mixing and grinding.The choice and preparation of raw materials directly affect the quality of the finished product.As the saying goes, raw materials are fundamental to making sintered bricks,showing the importance of the raw materials preparation and raw materials.

Wall Building Material Machinery Hfb5 230a Cement Brick Making Machine

Any kinds of soil can be used for making bricks?

Most of soil can be used for making bricks, but soil plasticity must be between 5 to 17. If the soil plasticity is too big or too small, you need to add additional material in the soil.

Wall Building Material Machinery Hfb5 230a Cement Brick Making Machine

What’s the difference between Vacuum extruder and non-vacuum extruder?

1) Vacuum brick extruder can make three kinds of brick:solid brick, porous brick and hollow bricks. To produce different kinds of bricks by changing the different brick die;

2) Another type is the common clay brick machine, non vacuum brick extruder, can only produce solid bricks. Vacuum brick is extruded out of the vacuum extruder. And non-vacuum extruder has no extraction equipment, so the brick hardness is lower than vacuum brick;

3) The vacuum brick machine is first extracted with air and water and then fired, the production time and firing time is shorter, rapid prototyping.Greatly reducing the production cycle time.

Welcome To Our Company Hope We Can Have A Good Cooperation.