Qt8-15 Automatic Hydraulic Pressure Cement Brick Block Making Machine Price Guatemala With Iso 9001

Qt8-15 Automatic Hydraulic Pressure Cement Brick Block Making Machine Price Guatemala With Iso 9001

The production process of sintered bricks is generally composed of four parts: raw material preparation, blank body forming, wet blank drying, and finished product firing.After raw materials are excavated, some can be processed by adding water, stirring and grinding equipment,while others will not work.Raw materials,such as mountain soil, coal gangue and shale,are to be broken and finely chopped, then followed by water mixing and grinding.The choice and preparation of raw materials directly affect the quality of the finished product.As the saying goes, raw materials are fundamental to making sintered bricks,showing the importance of the raw materials preparation and raw materials.

Qt8-15 Automatic Hydraulic Pressure Cement Brick Block Making Machine Price Guatemala With Iso 9001

5, Many brick cracks on adobes or broke into two sections, more wastes after sintering.

Reasons: There are too many viscous ingredients in raw materials, so the plasticity index is too high.

Solutions: change the ratio of raw materials, reduce the plasticity index. The plasticity index of clay can be up to 25, can be properly incorporated into the coal ash, slag, fly ash or waste of brick powder to make it thin.

Qt8-15 Automatic Hydraulic Pressure Cement Brick Block Making Machine Price Guatemala With Iso 9001

6, Soft adobe, easy to form, or crack after cutting.

Reason: the improper control of moisture in the mud.

Solution: soft adobe, easy to be deformed, showing that the water of sludge is too much, should reduce water. If the mud column quickly occurs crack or split of mud column after molding, which is caused by too little water in mud, it can be solved by increasing appropriate water.

Welcome To Our Company Hope We Can Have A Good Cooperation.