Automatic Cement Brick Machine Qty8-15 Machine To Make Concrete Blocks

Automatic Cement Brick Machine Qty8-15 Machine To Make Concrete Blocks

The production process of sintered bricks is generally composed of four parts: raw material preparation, blank body forming, wet blank drying, and finished product firing.After raw materials are excavated, some can be processed by adding water, stirring and grinding equipment,while others will not work.Raw materials,such as mountain soil, coal gangue and shale,are to be broken and finely chopped, then followed by water mixing and grinding.The choice and preparation of raw materials directly affect the quality of the finished product.As the saying goes, raw materials are fundamental to making sintered bricks,showing the importance of the raw materials preparation and raw materials.

Automatic Cement Brick Machine Qty8-15 Machine To Make Concrete Blocks

Some brick factories are not equipped with rollers and mixers, even without the feeders, all by artificially feeding into the brick machine with shovel, which inevitably occurs two major drawbacks.

1, raw material soil cannot be stirred and mixed well. The plasticity of raw soil is not exactly the same, and sometimes the disparity is very great, the Yellow River sludge is like that.

2, the inside fuels such as coal, coal gangue, slime and others cannot be stirred evenly. The two heterogeneous, will inevitably lead to the instability of adobes’ quality.

Automatic Cement Brick Machine Qty8-15 Machine To Make Concrete Blocks

4, malformed adobe and mud column, will spread immediately after cutting.

Reasons: Failure of the vacuum chamber

Welcome To Our Company Hope We Can Have A Good Cooperation.